The Starlink Mini terminal is designed as a compact, all-in-one solution with an integrated Wi-Fi router. While this design is ideal for typical consumer use, certain applications—such as custom networking setups, embedded installations, or power-constrained environments—may benefit from removing the internal router entirely. In this article, I’ll detail the process of physically removing the built-in Wi-Fi router board from the…
Category: starlink
How to physically transfer Starlink account from one terminal to another
Sometimes, a Starlink terminal’s PCB can be so severely damaged that repair is impossible or impractical. However, in many cases, it’s still possible to salvage the terminal—or at least save the account details stored on the damaged unit. Various scenarios may arise, such as a valuable account, limited access to account management, or the high cost of purchasing a new…
Starlink rev 3 (V2) power architecture
This article will explore how the Starlink REV3 (a.k.a. G3/V3) power architecture is implemented. We will learn how the Starlink “PoE” is implemented and how the Starlink board powers up. This information might be helpful for those doing Starlink repairs. The primary focus will be on the rev3 boards, which are the most common worldwide (as of summer 2024). Please…
Powering Starlink REV4 (V3) from the 12V without PoE injector/router
My 12V mod for the REV3 is extremely popular. Today, I will show you how to make a similar modification with the new terminal REV4 (a.k.a V3). As always, a lot of pictures below.
Starlink terminal revision 4: overview and tests
Revision 4 is the new version of the Starlink user terminal. As of February 2024, the new version is only available in the US. I decided to test the new hardware and compare it to the well-known REV3 (a.k.a. Gen2/V2 or “Standard Actuated”).