Hi all,
Looking to get 12V Gen2 router and 12V Dishy mod into the one case (All in One), is there a way to POE to 12 V the dish? so i can use the single cable?
And whats the best way to get RJ45 /Direct solder the dishy cable to the Router Board and maybe get 12 POE form the Board?
thanks
Ed
Hi Ed,
You can't power Gen2 Dishy with 12 V PoE—it needs ~48 V and proper injection. Don't solder directly; use an adapter and separate regulated power.
Hi Ed,
It's doable, but not easy. You can use a passive PoE injector on both sides to inject and extract power. Injector is bi-directional by its nature.
But... you can't use 12V here. The current at 12V will be extremely high for the PoE injector and Ethernet cable. That's why you need a DC-DC converters to step up the power from the original 12V to 48V, then step it back down to 12V on the Dish side to run the router and 12V mod.
Finding that ideal partner for a quiet dinner, or an energetic night out is now pretty much hassle free thanks to every sophisticated Mahipalpur Escort (https://www.vipescorts.co.in/vip-escorts-in-mahipalpur.html) who is professionally trained to deliver unmatched elegance, and charm in a very refined kind of way.