I started conversion of my gen 2 dishy a while back, and I've lost the internal 10 pin connector cable. I'm planning on doing a 12v conversion anyways and have found the information here (thanks!) but I need to find out which pins to connect to an rj45 jack and how. Does anyone have the pinout of this connector? I need to get this dish online in the next few days so it does not get bricked.
Hello. Here is the pinout:
(https://olegkutkov.me/wp-content/uploads/2024/09/starrlink_rev3_input_connector_and_magnetics_pinout.jpg)