Good afternoon. I have a non-working Starlink router for repair. Problems were found with the power supply, I saw problems with 12V with an oscilloscope, replacing the capacitors helped, but the router does not work. I connect via WiFi, but it does not see the dish, 48V does not come from the router, the cable is working and another one was connected. I read the dump from NAND
https://u.ua/d/6yJVm66/ , can it be damaged by voltage drops? I read this blog
https://olegkutkov.me/starlink-repairs-archive/ , can the IC EN88018N be damaged? Thank you.
https://ibb.co/Cs1YCgFzhttps://ibb.co/xKgDrGvbP.S. Sorry for my English, I use Google Translate.